Our newest Gripits are designed to use both flat head and Phillips screwdrivers. Although Gripits aren't designed for specific screwdriver sizes we recommen...

To remove your Gripit from the wall, remove the screw/bolt and any attached hooks, brackets etc. Turn the centre of the Gripit a quarter rotation anti-clock...

Gripit Self-Drive can be used with just a screw. We don’t, however, advise using the securing screw of Gripit Yellow, Red, Brown or Blue as a hanging poi...

All Gripits have been independently tested on 15mm plasterboard. For more information on this please see our Data Sheet.

Holes can be filled using any method suitable for patching plasterboard walls. Please see here for one such method.

Yes. Each Gripit colour has its own minmum safe spacing distance. Yellow: 25mm (centres) Red: 30mm (centres) Brown: 50mm (centres) Blue: 100mm (centres) P...

Please find attached the data sheet for the Gripit products. We would always recommend consulting a professional tradesperson to offer qualified confirmatio...

Gripits are not suitable for Cantilever, extendable, "pull out" or full motion TV Brackets. This type of installation causes immense stress on the plasterbo...

We recommend a flat drill bit or a hole saw. Please ensure that you are using the correct drill bit size for your fixing. The use of a twist drill bit is...

Yes. You will need a diamond hole cutter sized correctly for your fixing diameter and a suitable saw/file to cut four small slots in the tile (these are to ...