If you can't see an opening in the cavity, firstly check you have drilled the whole way through the plasterboard. Otherwise, It may be that you have hit an ...

Standard length screws/bolts are supplied with every Gripit. You can use a longer one if necessary for the job, however the screw should not touch any soli...

Yes, but don't worry. In addition to its unique wings, much of the strength of Gripit fixings is due to the large surface area that is in contact with the...

Installing Gripit is quick, simple and all you need is a drill (with the correct size drill bit), hammer and a screwdriver. Use a flat drill bit to make a ...

Gripit plasterboard fixings hold up to 113kg with no need for battens, wall modifications or compromises which saves time, money and labour. The unique gr...

Yes. Our Undercutting Tool  is specially designed to create a recess for the Gripit wings to unfold in plasterboard thicker than 15mm (e.g double thicknes...

Yes. Our Undercutting Tool  is specially designed to create a recess for the Gripit wings to unfold if installing on top of a dab of plasterboard adhesive.

Our newest Gripits are designed to use both flat head and Phillips screwdrivers. Although Gripits aren't designed for specific screwdriver sizes we recommen...

To remove your Gripit from the wall, remove the screw/bolt and any attached hooks, brackets etc. Turn the centre of the Gripit a quarter rotation anti-clock...

Gripit Self-Drive can be used with just a screw. We don’t, however, advise using the securing screw of Gripit Yellow, Red, Brown or Blue as a hanging poi...