All Gripits have been independently tested on 15mm plasterboard. For more information on this please see our Data Sheet.

Holes can be filled using any method suitable for patching plasterboard walls. Please see here for one such method.

Yes. Each Gripit colour has its own minmum safe spacing distance. Yellow: 25mm (centres) Red: 30mm (centres) Brown: 50mm (centres) Blue: 100mm (centres) P...

Please find attached the data sheet for the Gripit products. We would always recommend consulting a professional tradesperson to offer qualified confirmatio...

Gripits are not suitable for Cantilever, extendable, "pull out" or full motion TV Brackets. This type of installation causes immense stress on the plasterbo...

We recommend a flat drill bit or a hole saw. Please ensure that you are using the correct drill bit size for your fixing. The use of a twist drill bit is...

Yes. You will need a diamond hole cutter sized correctly for your fixing diameter and a suitable saw/file to cut four small slots in the tile (these are to ...

If you can't see an opening in the cavity, firstly check you have drilled the whole way through the plasterboard. Otherwise, It may be that you have hit an ...

Standard length screws/bolts are supplied with every Gripit. You can use a longer one if necessary for the job, however the screw should not touch any soli...

Yes, but don't worry. In addition to its unique wings, much of the strength of Gripit fixings is due to the large surface area that is in contact with the...